Warning: include(/home2/usinlife/public_html/templates/sj_thecool_free/includes/placehold.php): failed to open stream: No such file or directory in /home2/usinlife/public_html/templates/sj_thecool_free/html/com_k2/default/item.php on line 15

Warning: include(/home2/usinlife/public_html/templates/sj_thecool_free/includes/placehold.php): failed to open stream: No such file or directory in /home2/usinlife/public_html/templates/sj_thecool_free/html/com_k2/default/item.php on line 15

Warning: include(): Failed opening '/home2/usinlife/public_html/templates/sj_thecool_free/includes/placehold.php' for inclusion (include_path='.:/opt/php70/lib/php') in /home2/usinlife/public_html/templates/sj_thecool_free/html/com_k2/default/item.php on line 15

3D Printing at Usin'Life

Usin'Life uses an Ultimaker 2+ 3D printer to enable creation of parts for prototype devices. This was bought from a company in Netherlands called Ultimaker and has some really wonderful characteristics:

Build volume

230 x 225 x 205 mm

Speed

30 - 300 mm/s

Quality

up to 20 micron (0.02mm)

  • Layer resolution: up to 20 micron
  • Build volume: 23 x 22.5 x 20.5 cm
  • Position precision X Y Z: 12.5 / 12.5 / 5 micron
  • Print speed: 30 mm/s - 300 mm/s
  • Travel speed: 30 mm/s - 350 mm/s
  • Recommended filament diameter: 2.85 mm
  • Nozzle diameter: 0.4 mm
  • Stand-alone SD-card printing
  • Print technology: Fused filament fabrication (FFF)
  • Frame dimension X Y Z: 35.7 / 34.2 / 38.8 cm (no filament)
  • Operation nozzle temperature: 180° - 260° C
  • Operation heated bed temperature: 50° - 100° C

Here is how it looks like installed at our offices with a few parts printed in white on its heated bed. It came into operation from the first hour since it was delivered in the office!

 

 

© 2017. Usin'Life LLC. All Rights Reserved.